#Ip multiviewer ver 1.4.2.1 how to#
#Ip multiviewer ver 1.4.2.1 for mac#

If you type 192.168.1.108 in to your web browser and you don't see a web login page like the one above for the camera, make sure you are not getting a security page error. So depending on how your network is setup, the camera may or may not retain the default IP address of 192.168.1.108. DHCP is a function on the camera that allows it to ask your router for another IP address if 192.168.1.108 will not work on your network this will happen when you have another device with the same IP address or your IP address scheme is different (eg. To do this task you need to determine what is the IP address of the camera after you have connected it to your network in Step 1.Р”Р„lthough all of our IP cameras, DVRs and NVRs have a default IP address of 192.168.1.108 when they ship from the factory, this may be modified automatically on your network since they have a setting called DHCP activated. To view the camera, you are using your computer, tablet or smartphone to talk to it. When connected to a network, they require an IP address to communicate to other devices on the network, which is the same method in which your computer works on a network. IP security cameras are called network cameras because they use a network to send video/audio/data. Step 2: Determine the camera's IP address The PoE injector needs to be powered and comes with a power cable that requires a 110-220V AC outlet.Р”Р€) Connect using a power adaptor and non-PoE switch - if you have the ability to provide power to the camera using a power adaptor connected to a nearby electrical outlet, then you can power the camera separately using your 12V DC power adaptor and send data over a network cable to a regular non-PoE network switch or router. You run a network cable from a regular non-PoE switch or router to the LAN input (aka DATA IN) on the PoE injector, and another cable from the PoE port (aka Data & Power Out) of the injector to the network jack on the camera. If you only have one IP camera, we recommend using a PoE injector which is like an intermediary bridge between your network and the camera.

This method sends both power and data over the same cable.Р”Сћ) Connect using a PoE injector - think of this as a hybrid method of #1. You need one cable between the camera and one of the PoE labeled ports on the switch. There are three ways to connect a PoE based IP camera to a network:Р”РЋ) Connect using a PoE switch - this is by far the easiest method. Step 1: Connect the camera to your networkР”Р‡irst, connect the camera to your network. The same process outlined in this article should be applied when trying to view your NVR or DVR from your computer using a web browser.

#Ip multiviewer ver 1.4.2.1 for mac#

The guide below is for Windows computer users, however the process is very similar for Mac computer users as well.

If you've purchased one of CCTV Camera World's IP cameras then it's easy to view your camera on your computer.

#Ip multiviewer ver 1.4.2.1 how to#

You have it in your hands, and you are wondering how to view the darn thing. Let's say you know very little about IP security cameras and you just purchased one.